How Can I Resolve “Windows Kernel Event Tracing Error Code: 0XC0000035”?

One often occurring error message associated with kernel event tracing is Error Code 0XC0000035. This instructional guide offers effective methods for maintain and troubleshoot issues with your computer.

A Windows Kernel Event Tracing Error is being indicated by a steady barrage of 0XC0000035 errors in Windows Event Viewer, according to certain Windows users. It has been established that this problem exists in all existing versions of Windows, including Windows 8.1, Windows 11, Windows 10, and Windows 7.

We will talk about the 0XC0000035 error and how to resolve it in this article.

Why Does Windows Give Me “Error Code: 0XC0000035”?

One often occurring error message associated with windows kernel event tracing is Error Code 0XC0000035. This error can be caused by a number of things, but problems with the Windows Kernel Event Log service are the most frequent cause.

Numerous logical explanations for this error were found after extensive investigation. The following is a brief summary of possible causes for 0XC0000035 errors to overflow in your Windows Kernel Event Viewer:

• The Windows session’s Event Tracing is being altered by Perfdiag: Perfdiag uses the ETW session to gather information for performance analysis. Interrupting this session may result in the 0XC0000035 error.
• The Event Trace Session was terminated manually. Users have occasionally reported that manually initiating the Event Trace Session resolved the 0XC0000035 problem.
• Outdated network drivers (Intel): If you are using the network drivers fleet on a Windows computer, the issue is most likely the result of a conflict between a kernel process that is sensitive and the Intel WI-FI driver.
• Incorrect IP range or DNS cache: You should anticipate that this problem will arise under certain circumstances, such as when your DNS cache is tainted or you have been assigned an incorrect IP range.
• Third-party antivirus: 5It turns out that uninstalling the third-party program or turning off real-time protection are the only ways to solve this issue.

These are a few reasons why the error code 0XC0000035 could occur. We will talk about solutions for this issue in the following section.

How Can I Fix Windows “Error Code: 0XC0000035”?

There are several approaches you might take to resolve this issue. Restarting the Windows Event Log service should be your first step. Take these actions to accomplish this:

Step 1: Restart your computer

Restarting your computer should be your first step. By doing this, the Event Log service will be able to reset itself and perhaps resolve the 0XC0000035 problem. Restarting the computer can help resolve many Windows-related issues. Do not forget to start here before attempting more advanced techniques.

Take these actions to restart your computer:

1. To access the Power button, click the Start menu.

2. Select Restart from the menu that drops down.

3. Check to see whether the same issue appears when you launch the Event Viewer after restarting your computer.

Technique 2: Clear DNS and IP Cache

Try clearing your DNS cache and changing your IP address if restarting your computer does not solve the problem. By doing this, any corruptions that might be the source of the 0XC0000035 problem will be fixed. Take these actions to accomplish this:

1. Look for the magnifying glass icon to open the taskbar search bar. Alternatively, you can use the Windows + S keyboard shortcut to open it.

2. Open a search window and type Command Prompt. Select Run as Administrator with a right-click on it when you see it in the results.

3. If the User Account Control (UAC) prompts you to activate the program with administrator access, click Yes; it will allow the app to launch with administrative permissions.

4. Enter the commands listed below, one after the other, using the Enter key on your keyboard: Input the commands below in the exact order, and then click afterwards the Enter key on your keyboard after each line:

• ipconfig /flushdns
• registerdns in ipconfig
• ipconfig /renew
• IPconfig /release

5. Close the prompt that appears.

Step 3: Turn off IPv6

If the issue 0XC0000035 persists, you might be able to resolve it by turning off IPv6. This may be the reason for the 0XC0000035 issue as it interferes with the Event Log service. Take these actions to accomplish this:

1. To access the WinX menu, press the Windows + X keys on your keyboard. From the context menu, select Network Connections.

2. In the left pane, choose the connection type you currently have (Wi-Fi or Ethernet, for example), and then click the Change adapter options button.

3. To access the Properties menu, right-click on the network adapter wherein gives you trouble and choose Properties from the context menu.

4. Once you reach the Internet Protocol Version 6 (TCP/IPv6) choice, scroll down. To make it inactive, click the box once if there is a checkbox next to it. If the box is already empty, your device does not have IPv6 configured. Try an alternate fix for the error. Press OK. 

5. If IPv6 was indeed the specific reason behind your computer showing “Error Code: 0XC0000035,” then this solution should resolve the issue.

Method 4: Turn Off Your Antivirus Briefly

On Windows, antivirus programs are known to cause a variety of issues. Antivirus apps may be the source of false positives, performance problems, and the 0XC0000035 error, among other problems.

You might be able to resolve the 0XC0000035 error if you can turn off your antivirus software for a short while. Try whitelisting the Event Log service in your antivirus settings if that resolves the issue.

Take these actions to accomplish this:

1. To access Task Manager, right-click on a vacant area in your taskbar and select it from the context menu.

2. Utilize the header menu positioned at the top of the window to access the desired functions and options, navigate to the Startup tab. Locate your antivirus program in the list above, then click once to select it.

3. Select the Disable button that is now displayed in the window’s lower-right corner. By doing this, you will prevent the program from opening when your device first boots up.

4. Try restarting your computer to see if the problem still does not appear in Event Viewer when using it.

Step 5: Activate the Superfetch and SysMain Services

It could be possible to resolve the 0XC0000035 problem if you enable the SysMain and Superfetch services. These services have the ability to resolve the 0XC0000035 error and are known to aid with Event Log performance. Take these actions to accomplish this:

1. Using the keyboard, press the Windows + R keys. The Run utility will launch as a result.

2. Enter “services.msc” using the keyboard’s Enter key without putting quotation marks around it. The Services window will open as a result.

3. After you reach the SysMain service, scroll down. From the context menu, select Properties after performing a right-click on it.

4. Continue using the General tab. If the service is not running right now, make sure the Startup type is set to Automatic and then click the Start button beneath the Service status. If you do this, the service will launch on its own whenever your machine boots up.

5. To close the window, click Apply and then OK. To enable the Superfetch service, return to the Services window and follow the same instructions.

Once you have made this change, you ought to be able to observe whether the problem occurs again. Read on to discover an alternative fix if Kernel Event Tracing is still accompanied by “Error Code: 0XC0000035”!

Method 6: Modify the Registry’s Autologg Key

You might be able to resolve the 0XC0000035 error if you continue to receive it by making changes to the autologg key in your registry. There is a known solution for the error code 0XC0000035. Take these actions to accomplish this:

1. The Run dialog box appears when you press the Windows + R keys. Press Ctrl + Shift + Enter after typing “regedit” to launch the Registry Editor with administrator privileges.

2. To access the following Registry key, utilize the left-hand navigation pane of the window or use paste the URL into the address bar:

OperatingSystem\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\EventLog-System{b675ec37-bdb6-4648-bc92-f3fdc74d3ca2}

3. Select Modify from the context menu by performing a right-click on the Enabled registry entry in the right-side pane.

4.  Make sure you set the Base to Hexadecimal and the Value data to 0. When you are done making these adjustments, click OK.

5. Restarting your computer will ensure that the modifications you made to the registry are permanent. Check for any new instances of the 0XC0000035 issue by opening the Event Viewer.

Upgrade Your Intel Drivers Using Method 7

Updating your Intel drivers may help resolve the 0XC0000035 error if you are still seeing it. Among the many issues that outdated drivers might bring about is the 0XC0000035 error.

It is fair to presume that an Intel driver problem is the source of the problem if the Event Viewer error links to one of the following addresses:

• Dll located at C:\Program Files\Intel\WiFi\bin\MurocApi.dll
• Intel\WiFi\UnifiedLogging\C:\Program Files\Intel\WiFi\\ MurocLog.log

The Intel Driver & Support Assistant is the only method that has been shown to work in a confirmed resolution. Take the following actions to make sure you are using the most recent driver version that works with Windows:

1. Open your default browser and go to the Intel Driver & Support Assistant main page.

2. Click the Download All option after the Intel Driver & Support Assistant utility has finished its initial scan. Click the Install All option after the download is finished, then watch as all of the drivers install.

3. Depending on which drivers require updating, installing the drivers could require you to follow an extra set of instructions.

4. After installing all the drivers, give your computer one last restart to see if the issue has been fixed.

Briefly stated

• There are several potential causes of the windows kernel event tracing issue “issue Code: 0XC0000035”, such as out-of-date drivers, a faulty DNS cache, or an unreliable IP range.
• There are several approaches you might take to resolve this issue. Restarting the Windows Kernel  Event Log service should be your first step.
• Try turning off IPv6, clearing your DNS cache, or changing your IP address.
• Changing the autologg key in your registry or temporarily turning off your antivirus software may also help solve the issue.
• You can try updating your Intel drivers if everything else fails.

In summary

On Windows, the “issue Code: 0XC0000035” is a quite frequent issue that has several possible causes. We hope that this post was helpful in solving the issue with your computer.